What is Transfer Molding?
It is a prevalent manufacturing approach that primarily applies to thermosetting plastics and rubbers. The process involves placing a pre-measured molding charge into the upper part of the mold(known as the transfer pot), where the heating mechanism heats the material to a liquid or semi-fluid state. Then, the plunger compresses the charge and injects it into the mold cavity (lower part). Following that, a mold heating process ensures the proper cure necessary for setting. Finally, it creates the exact part while opening the mold.
How transfer molding process is distinct from compression and injection molding? It involves placing the material into a separate chamber before injecting it into mold cavities. In contrast, the liquid material is injected into the mold cavity during the injection molding process, and the material goes in the open mold during the compression molding before compressing with a press.
Furthermore, it is a precise and cost-effective way to mold thermoset resins and rubbers. The application is diverse, from electrical connectors and actuators to seals and gaskets for an aircraft.
Advantages of Transfer Molding
Since it combines compression and injection molding capabilities, you can find several advantages in precision, time, cost, and design flexibility.
Here is the list of transfer molding advantages;
High compression pressure makes it more precise than compression molding.
Although not as fast as the injection molding method, transfer molding has a faster production cycle than compression.
It allows for the parts with more Shaper Edges because material transformation can fill even the tiny and most complex features cavity.
Inserts or embed parts are possible. For example, metal pins on an epoxy body to create an electrical connector.
A simple pot and plunger setup makes the tooling cost cheaper.
Disadvantages of Transfer Molding
The overflow grooves eject the surplus charge or feed while transforming from pot to cavities. As a result, it leads to material wastage.
The additional charge transfer step makes it a longer process than injection molding.
The transfer molded parts are more prone to void or air pockets due to the possibility of air trapping during the material transformation stage.
How Does Transfer Molding Work?
The transfer molding process is simpler than other manufacturing processes. As previously mentioned, it involves placing and heating the raw material into a separate chamber (generally the upper part of the mold) and then pressing it into the mold.
transfer molding setup
So, first, let’s understand the setup of transfer molding.
Component Description Function
Plunger It applies pressure to the molding compound. Positions above the pot and push the material into the mold cavities.
Pot & Heater A transfer chamber or pot is there for placing the molding material A heater surrounds the pot for heating purposes.
Upper and Lower Parts of the Mold Two halves come together to form the mold cavity in the lower part of the setup. The upper part is where material enters, and the lower part forms around the core.
Hinge Allows the molding compound to cavities by opening the sprue. It allows the transfer of the feed into the mold after heating.
Extraction Pin Facilitates the ejection of the final product from the mold. Ensures safe and efficient removal after curing.
Furthermore, how does the process take place, or how transfer molding works by using this setup? The answer lies in the several chronological steps.
working of transfer molding Step by Step
Step 1: Preparation of the Molding Compound
The process starts with feed or molding compound preparation. It involves the conversion of chosen resin into powder, small pellets, or granules form. Meanwhile, mixing colorants, plasticizers, stabilizers, or other additives can help to achieve desired properties or aesthetics. Additionally, the molding compound is heated to a predetermined temperature.
Step 2: Loading the Compound into the Transfer Pot
Next, the molding compound goes into the transfer chamber or pot with a gravity feed mechanism. However, ensuring the clean mold and proper releasing agents on the cavities wall is essential at this stage.
Step 3: Closing the Mold
The plunger pushes the molding charge into cavities with the help of a press(generally hydraulic). In this step, the material in the chamber goes into cavities through the sprue, followed by the closing of the mold.
Step 4: Applying Heat and Pressure
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.;
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests. cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests. cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests.
cURL Too many subrequests. cURL Too many subrequests. cURL Too many subrequests.
Micro Transfer Molding
This refers to the transfer molding of parts or products that are small in weight and size(a few grams and mm). The size of transfer molds, setups, and other equipment is also small. It enables the production of tiny and complex parts with precision, maintaining structural integrity.
The micro-transfer molding is suitable for manufacturing tiny electric connectors, actuators, microfluidic devices, micro-scale medical implants, drug delivery systems, and some micro-optical components.
Comparison with Other Molding Processes
mold tooling assembly
Since the molding technology has other processes besides transfer molding, let’s compare it with two other approaches: injection and compression molding processes.
Injection Molding vs Transfer Molding
The injection molding process injects the molten form of material into a mold. In contrast, the transfer mechanism places the pre-measured resins in the transfer chamber and passes them to the mold. Thus, injection is suitable for thermoplastics and large volumes, while transfer is for thermoset composites and small to medium volumes. Subsequently, injection molding is a favorite for larger thin-walled parts, and compression is for thick parts.
Compression Molding vs Transfer Molding
The material is directly placed in an open mold during compression molding without heating it. So, this is the key difference between the two. Furthermore, the transfer molding process can create more precise and intricate detailing than compression. Next, compression is popular in thermoset and composite molding. However, the transfer approach is mainly for thermoset materials.
Table: Compression vs Injection vs Transfer Molding
Criteria Compression Molding Injection Molding Transfer Molding
Precision Good precision. Very high precision High precision
Mold Complexity Relatively simple molds. Complex molds Moderately complex molds
Materials Primarily thermoset polymers and composites Thermoplastics, thermosets composites, and elastomers. Primarily thermoset polymers
Production Volume Medium to high volumes High-volume production Best for low to medium volumes
Surface Finish Good surface finishes Excellent surface finishes Smooth finish
Tooling Cost Lower Higher Moderate
Structural Strength Good Excellent Excellent
Choose XTJ Molding Services for Plastic Parts
The transfer molding process involves many special considerations and chronological steps. It demands expertise and proper tooling to produce quality plastic parts. This is where XTJ’s expertise shines. Our team of seasoned engineers leverages extensive experience and advanced plastic molding facilities to transform your unique design specifications into functional, high-quality plastic parts.
At XTJ, we believe in the power of precision and the importance of custom solutions. Whether you’re in the automotive, healthcare, consumer electronics, or any other industry, our injection molding and comprehensive plastic part services are designed to cater to your specific needs. Our approach is collaborative and focused on delivering results that not only meet but exceed expectations.
XTJ is a leading OEM Manufacturer that is dedicated to providing one-stop manufacturing solutions of Transfer Molding from prototype to production. We are proud to be an ISO 9001 certified system quality management company and we are determined to create value in every customer relationship. We do that through collaboration, innovation, process improvements, and exceptional workmanship.
